I am the mobile container
This is the latest laboratory incubator to be launched by NuAire, the experts in contamination control. This exciting new CO2 incubator range has no in chamber fan making it easy to clean whilst still providing a Class 100 environment due to the use of the HEPA filtration system. It has a large 200-litre chamber, sophisticated control system which allows logging of all data which is essential for today’s cell culture. There is also the option of copper lining and a zirconia sensor to give hypoxic conditions as low as 0.5% oxygen. This is a state of the art CO2 incubator suitable for the most demanding applications including stem cell research.
A unique blend of product features to promote cell growth through the precise control of humidity, temperature, and CO2 gas while minimising the potential for contamination creating the most reliable conditions.
A microprocessor-based, non-dispersive, single source dual wave infrared (IR) sensor controls CO2 levels within the chamber.The wavelengths used are absorbed by only CO2 making the measurement insensitive to other components such as water vapor. Advanced design provides a very stable output minimising drift and requiring less frequent calibration.
A large capacity (200 litres) has more useable space with a small footprint. Chamber walls are directly heated by heating elements on the sides, bottom, top, and back of the chamber, providing a superior temperature uniformity. Dual temperature sensor probes monitor the growth chamber environment making necessary changes when needed. A high-density insulation with a high “R” rating covers the complete outer surfaces of the incubator inner chamber.
The inner chamber is constructed of 16 gauge, polished stainless steel using crevice-free construction, which provides an easily cleanable inert surface that does not promote biological growth. All shelves, shelf supports and guide rails are easily removable and can be autoclaved separately.
We Know All About Incubators
We'll have you up and running in no time at all!
Introduction to NuAire's Range of Incubators
Take a look at some of this product's features.
Discover Key Features
To get the best out of your Incubator
Closed Loop HEPA Filtration
Learn more about this product's special feature.
|Chamber Volume||7.06 ft.3 / 200 L|
|Exterior Dimensions (W x D x H)
|26.75 x 27.0 x 41.5 [679.5 x 691 x 1054]|
|Chamber Dimensions (W x D x H)
|21.15 x 21 x 26.5 [546.1 x 533.4 x 673.1]|
|Weight||235 lbs. / 106 kg.|
|Dimensions (W x D) in. [mm]||19 ¾ x 18 ¾ [502 x 476]|
|Max. Capacity||23 Shelves|
|Max. Weight Capacity||20 lbs. (9 kg) per Shelf|
|50 lbs. (23 kg) per Incubator|
|Gas Connections||0.25" (6.3 mm) Tubing|
|Gas Input Pressure||20 PSIG (1.4 BAR) Input Pressure Maximum. Two Stage Gas Regulator Required|
|Startup Power||625 watts|
|Running Power||250 watts|
|Heat Rejected||14 BTU / minute|
Temperature Control System
|Sensor Type||Precision Integrated Circuit|
|Range||5°C to 55°C (5°C aboveambient to 30°C max. ambient)|
|Uniformity||± 0.3°C at 37°C|
CO2 Control System
|Sensor Type||Infrared single source dual wave length|
|Range||0.1 to 20%. (0.0 set point idles system)|
|Recovery||Up to 5% ±0.2% / -0.5 in 5 minutes average|
|Display Resolution||± 0.1%|
|CO2 Control Logic||Fixed/Algorithm/Manual, Environmental Adaptable